BUDS2 Avto Calibration – iBR – SeaDoo

iBR AUTO CALIBRATION- SEADOO -2017-2023 yaers

NOTICE iBR auto-calibration must be per-formed with the complete reverse gate as-sembly properly installed. Performing theauto-calibration procedure without the reversegate assembly in place will damage the actu-ator. Perform after repairing or removing the jetpump and/or iBR system components.

Connect the vehicle to the BRP diagnostic soft-ware (BUDS2).

1. Connect diagnostic

Interface DIUS MPI-3 adapter (p/n 529036353) + Diagnostic Cable (p/n 710000851)+ Software BUDS2 for models 2017-2023+ license Mechatronic expert 

So that your VEHICLE does not fall asleep. I RECOMMEND Connect Power Interface (BRP p/n 515177223 + p/n 529035997).

2. Open BUDS2 and scan VEHICLE

3. TAB–Functions

4 -TAB–Move iBR Up/Down -CLICK

6- TAB -Avto Calibration IBR – CLICK

NOTICE Make sure the iBR actuator is un-locked before pressing the Auto Calibrationbutton.

Follow the informations displayed on the screenso start the AUTO-CALIBRATION sequence