BRP Maverik 2021. The variator has a belt temperature sensor. The sensor does not work correctly, it constantly produces a temperature of 202 C.”
Tell me, please, how can I disable it via BUDS2?
Answer
Check the sensor, check the wiring,
Everything is fine with the wiring. If you disconnect the connector, the error “Incorrect sensor data” appears, connect the connector – “High temperature of the variator belt.” You need to turn it off program BUDS2 so that it doesn’t squeak, there is no “check” and no overheating errors.
BRP Maverik 2021. На вариаторе установлен датчик температуры ремня. Датчик работает не корректно, постоянно выдаёт температуру 202 С”.
Подскажите, пожалуйста, как можно отключить его через BUDS2?
Ответ
Проверьте датчик, проверьте проводку
С проводкой всё норм. Если отключить разъём, то появляется ошибка “Некорректные данные датчика”, подключаем разъём – “Высокая температура ремня вариатора”. Нужно отключить его в программе, чтобы не пищал, не было “чека” и ошибки по перегреву.
