BUDS2 Add New RF-key

BUDS2 Add New RF-key

Programming D.E.S.S. Keys

1. Connect the vehicle to the BRP diagnostic software (BUDS2). Refer to COMMUNICATION TOOLS subsection.

2. Briefly press START/STOP button to power the ECM.

3. Install a tether cord on the engine cut-off switch to program a D.E.S.S. key.

4. Go to the key page.

5. Ensure that anti-theft system is activated. If
   not, activate it before trying to add a key.
6. Install new key on the D.E.S.S. post.
7. Press the READ button (top right of the table).
8. Select key type
9. Press ADD button to register the key. The new
   key should be displayed in the table. Repeat
   steps 6 to 9 to add other keys

#buds2 #key #buds #license #rfkey #seadoo #pwc #mpi3