B.U.D.S. > User Interface > Faults Page

[Natali]

Description

The Faults page provides functions that you can use to read, clear and troubleshoot module faults.  All the faults available for a particular module are listed in the Summary table.

On most vehicles, the fault parameters are continuously and automatically updated at a rate of about two times per second.  On a RFI vehicle however, you must update the parameters manually by clicking on the Refresh button.

To open the Faults page

1.	Read MPEM document from the vehicle.

2.	Click on the Faults page thumbnail.

3.	The content of the Summary table depends on the type of vehicle.

Watercraft equipped with a 947-DI engine

Watercraft equipped with a 1503 engine

Watercraft equipped with a RFI engine

Snowmobile equipped with a SDI or a V1004 engine

To get more details on a fault

1.	Select a fault in the Summary table.

2.	Click on the More Details… button.

3.	Click on the Close More Details button or any MPEM document page thumbnail when you are finished.

Note

You can also get more details on a fault by double-clicking on the fault in the Summary table.

 

[Author]

Posts