BUDS 2 CHANGE from T3 to International ATV

[Natali]

This question is often asked to me

All four-wheelers that have T3 homologation have a speed limit of 105 km/h. These are 2017+ models. Can this limit be removed?

Before preform this steps, you must have information from International model of ATV.  

OPEN WEB epc.brp.com  International model of ATV.

1. Connect ATV diagnostic

DIUS MPI-3 adapter (p/n 529036353) + Diagnostic Cable (p/n 710000851)+ Software BUDS2 for models 2017-2025+ license Mechatronic expert 

So that your VEHICLE does not fall asleep. I RECOMMEND Connect Power Interface (BRP p/n 515177223 + p/n 529035997).

3. Open BUDS2 and scan T3 model of ATV

4. Click on VEHICLE and click on SUMMARY

5. Rewrite VEHICLE MODEL NUMBER from International model and click TAB Write

6. Click on TAB CDID

7. In right table remove check at T3 value and  CLIKC Write 

 

  8. Click on SETTINGS button

9. In table write 0 at TAB OPTION – International MODEL and Write    

  10. Click TAB  M3C Logistic programming 

11. Remove check at Byte 6 Bit 2 International model

12. Remote check at Byte 6 Bit 4 T-Category and write data

 

 

 

13. Disconnect ATV from diagnostic .   Speed test ATV    

[Author]

Posts