- This topic is empty.
- Posts
My example of working without my husband’s support)
The client needed help: currently i screw up my ECU/ECM because laptop crash in the middle of an update.
photo of his block ECM 2015 maverick
- Diagnostic Port on your Vehicle – and connect the diagnostic end of the interface MPI
2. Information ECU -program BUDS
you need to reflash the block ECU – Download software Dius Flasher
3. Open BRP website https://epc.brp.com/ Information number ECM/ECU 420265932
4. Open website https://www.brptuning.com.ua/ Tab DIUS reflash ECU- Buy stock firmware 420265932
5. Open Program Dius Flasher
6. Tab Dius Tools Click
7. Click Tab Update
You will see the Firmware you bought 1 piece. example photo
Example photo, you choose click tab ssv 666063 number 405 Click on the REFLASH button.
The reprogramming process will be completed when the Transfer Data Bytes counter reaches 100000.
After successful process completion, the status bar will change to Read INFO Complete.8. Open BUDS
9. Check Vin number Vechicle
Change Model number- Vechicle firmware 2016 yaer. this means the model number will be 2016
10 . Tab Write Data click
11. Click Tab Module click Tab Cluster click Tab Security coding
Click Tab OK
click Tab OK
Click Tab Write Data
12. Click Tab Module click Tab DPS click Tab Update
13. DPS Update Click OK
Click Tab YES
Click Tab YES
14. After update Click Write Data
15. Open Tab Settings click, Tab Configuration click
You need to configure these ALL settings vehicle
Click Write Data
16. Tab Faults delete error
Tab Write Data click
17. Tab Read data click
18. Tab Faults open Error does not show againDisconnect diagnostic MPI.
Vehicle Start ENGINE
- You must be logged in to reply to this topic.