- This topic has 0 replies, 1 voice, and was last updated 3 years, 1 month ago by
.
- Posts
Question: How do I the Disable limit Speed BRP vehicle ?
BUDS2 License Mechatronic Expert (LEVEL 3)
Answer: INFO!!!
(Maximum Speed)- See information about your vehicle Manufacturer’s declared BRP.
1. Look at the sticker of your BRP vehicle. This is the BRP lineup.
2. You need to change the North America lineup to International . You find the International Model number vehicle . On the BRP website https://epc.brp.com/
3. Change the Model Number vehicle in the BUDS2 program.
4. Key– Normal\ Performance- ( Disable Speed limits)
5. GPS-Turn off in the program BUDS2- ( International Model number vehicle – Disable GPS-)
6. Factory settings of vehicle International – (Disable Speed limits.) That’s all you need to turn off the Speed Limits in vehicle BRP. Remember.
All BRP- North America line – On Speed Limits.❗
All BRP-International – Disable Speed limits.
Step by Step
OPEN -BRP website https://epc.brp.com/
International Model number vehicle– BRP …..write on a piece of paper
- Connect diagnostic
So that your VEHICLE does not fall asleep. I RECOMMEND Connect Power Interface (BRP p/n 515177223 + p/n 529035997).
Option 1: Open BUDS2 and TAB scan VEHICLE
Option 2: Tab Summary Click
Option 3: Tab Vehicle Model Number – click – Enter International Model number vehicle
The program BUDS2 will automatically save the settings
example photo
Option 4: Check Tab Keys change Key -Performance/Normal
Option 5: Check Tab Setting – Tab GPS-
Option 6: Tab Settings Click
Tab ECM variant Coding Click
Byte 2 Bit6- check the box + 2 – 5 km.
Byte 2 Bit7 check the box + 2 – 5 km.
example- photo
Save the values and then you’re all set.
example- photo
On the BRP website https://epc.brp.com/
- You must be logged in to reply to this topic.