Problem: SKI-DOO/LYNX 2008-2016 ECM programming with BUDS

[Natali]

Problem:BUDS All Products will not connect to the ECM when installing a new service part E-Tec ECM 515060780 (600 E-Tec) or 515020756 (800 E-Tec)

Please follow step-by-step instructions.

Connect computer USB PORT  – diagnostic device MPI DIUS and
MPI-3 adapter (p/n 529036353) + Diagnostic Cable (p/n 710000851)

 

Procedure:
Ensure BUDS All Products and BUDS2 are closed before starting this procedure.
1. Connect the MPI to the computer, but do not open BUDS at this point.
2. In the Window Search Bar, enter “Cananalyser” and open the “CanAnalyser3 Mini” app.

 

 

STEP

4. Click on “CAN” and change the Bitrate to 250 CIA. Then press OK.

STEP 

 

 

STEP

7. Press the yellow computer screen icon. This will start the communication, and you will see data
appear in the message window.

 

OPEN 

8. Open BUDS All Products and connect it to the vehicle.
9. Follow the 2015-10 ECM programming Service

B.U.D.S. Programming blank ECM in BUDS the ECM FLASH Ski-Doo/Lynx

10. Close the CanAnalyser window after programming the ECM

[Author]

Posts